GPS & AIS REPAIR IN LOME

GPS and AIS are essential navigation and communication systems on modern commercial ships. Accurate position, course, speed and vessel identification information is required for safe bridge operations and effective communication with other vessels and shore-based facilities. Our GPS & AIS Repair in Lome service provides professional troubleshooting, maintenance and repair support for ships calling at Lome Port, Togo.

Our marine technicians can inspect GPS and GNSS receivers, AIS transponders, antennas, displays, power supplies, communication interfaces and associated navigation wiring. SOLAS Chapter V includes requirements for shipborne positioning systems, while AIS requirements apply to specified categories of commercial and passenger ships. AIS is designed to automatically exchange information including vessel identity, position, course, speed and navigational status.

GPS and GNSS faults can appear in several different ways. A ship may experience loss of position, intermittent satellite reception, incorrect coordinates, unstable speed or course information, poor signal quality or repeated receiver alarms. Our technicians can check the antenna, coaxial cable, connectors, receiver unit, power supply and data output to determine the source of the problem.

AIS troubleshooting requires attention to both the transponder and the navigation data supplied to it. AIS receives information from external sensors such as GNSS and heading equipment, and interface problems can affect the accuracy or availability of transmitted data. IMO guidance identifies position, heading and rate-of-turn information as important AIS inputs where applicable.

Our service can include inspection of AIS Class A equipment, display units, VHF/AIS antennas, antenna cables, connectors, GPS inputs, gyro heading signals and communication interfaces. Where AIS information appears incorrect, technicians can check whether the problem originates from the transponder itself or from an external sensor providing navigation data.

Communication faults can also occur between GPS, AIS, ECDIS, radar, VDR and other bridge equipment. Serial data connections, NMEA interfaces, network communication, converters and terminal connections may be inspected when navigation information is not being transferred correctly. GNSS equipment is designed to provide positioning information that can interface with systems such as ECDIS, AIS and VDR.

Preventive maintenance can include inspection of antennas and cables, connector checks, power supply verification, display testing and review of navigation data. Particular attention can be given to equipment exposed to saltwater, humidity, vibration and temperature changes during continuous shipboard operation.

GPS & AIS Repair in Lome can be arranged while the ship is alongside or at anchorage, depending on access and operational conditions. Replacement antennas, receivers, transponders, displays, cables and interface components can also be arranged according to the equipment manufacturer and vessel requirements.

For GPS & AIS Repair in Lome, ship operators can provide the vessel name, IMO number, equipment manufacturer, model and description of the fault. This allows our technical team to prepare suitable tools and spare parts before attending the ship at Lome Port.

Reliable GPS and AIS operation supports accurate navigation information and effective vessel identification. Our marine electronics service focuses on identifying the actual cause of the fault and restoring the affected navigation equipment efficiently.